Welcome visitor.

Data Logger / Modules


AEM 22 Channel CAN Expander Module
AEM 22 Channel CAN Expander Module

AEM 22 Channel CAN Expander Module

AEM 22 Channel CAN Expander ModuleAEM’s 22 Channel CAN Sensor Module (PN 30-2212) converts analog, ..

$486.10
$349.99

AEM 4 Port AEMnet CAN Hub
AEM 4 Port AEMnet CAN Hub

AEM 4 Port AEMnet CAN Hub

AEM’s 4 Port AEMnet CAN Hub is the perfect solution for connecting multiple AEMnet CAN bus-enabled d..

$97.21
$69.99

AEM 6 Channel CAN Sensor Module
AEM 6 Channel CAN Sensor Module

AEM 6 Channel CAN Sensor Module

AEM 6 Channel CAN Sensor ModuleAEM’s 6 Channel CAN Sensor Module provides an affordable and easy way..

$208.29
$149.97

AEM 8 Channel K-Type EGT CAN Module
AEM 8 Channel K-Type EGT CAN Module

AEM 8 Channel K-Type EGT CAN Module

AEM's 8-Channel K-Type Thermocouple EGT CAN Module (PN 30-2224) allows racers and enthusiasts to ins..

$584.76
$421.03

AEM AQ-1 Data Logger
AEM AQ-1 Data Logger

AEM AQ-1 Data Logger

AEM AQ-1 Data LoggerAEM’s AQ-1 Data Logger is easy to use, feature packed, and with an approximate..

$520.59
$374.82

AEM AQ-1 OBDII Data Logger
AEM AQ-1 OBDII Data Logger

AEM AQ-1 OBDII Data Logger

AEM AQ-1 OBDII Data LoggerThe AQ-1 OBDII Data Logger (PN 30-2501) and AQ-1 OBDII wiring harness (P..

$624.98
$449.98


AEM 22 Channel CAN Expander Module

AEM 22 Channel CAN Expander Module

AEM’s 22 Channel CAN Sensor Module (PN 30-2212) converts analog, digital and frequency inputs into an AEMnet CAN bus signal that can be transmitted to the CD-5 Carbon (releasing March, 2018) and CD-7 Digital Dashes. This expansion module provides a way for users with carbureted vehicles to add a CD Dash, and lets users with existing CAN-based devices add more channels to the display for viewing and/or data logging (data logging requires CD-5L Carbon or CD-7L logging Dashes). The 22-Channel CAN Sensor Module is compatible with the CD Dashes only; it will run in parallel with 3rd party CAN devices on the CD dashes but it is currently not compatible with AEM’s AQ-1 Data Logger, Series 2 or Infinity ECUs, or 3rd party ECUs or loggers.

 

FOR CARBURETED VEHICLES

The 22 Channel CAN Sensor Module has everything that users need to get data onto the Dash in a carbureted vehicle, including tachometer and fuel level, wheel speeds for MPH, and pressure/temp sensors. Users can daisy-chain two of the Modules together, which is ideal for enthusiasts who have a logging CD Dash and want to expand their logging capabilities.

 

FOR CAN-BASED EFI USERS

Racers who are using a CAN-based programmable ECU and have consumed all of the inputs in the ECUs now have a way to add more channels to a CD Dash without having to purchase multiple CAN-based devices.

 

WHAT YOU GET

The 22 Channel CAN Sensor Module includes four 0-5v analog inputs, four Temp inputs, four user configurable inputs for 0-5v, Temp or RTD, dedicated fuel level input, six digital inputs for switched or duty cycle, Tach input and two VR inputs for crank, wheel or driveshaft speeds. A harness is included with pre-pinned, 36-inch color-coded wires to connect inputs, and a DTM-style AEMnet cable to connect to a CD-5 Carbon or CD-7 Dash. Users can select the CAN speed delivery rate.

 

FEATURES

  • Convert analog, digital and frequency-based inputs to AEMnet CAN bus for display on CD-5 Carbon and CD-7 Dashes!
  • Perfect for users with carbureted vehicles who want to add a CD Dash display
  • Ideal for EFI users who want to add more channels to a CD Dash without purchasing multiple CAN-based devices
  • Daisy chain two Modules together for additional channels
  • IP65-rated enclosure is ‘dust tight’ and water resistant
  • Wiring harness included with 36-inch flying leads and pre-wired CAN cable
  • Four Dedicated 0-5V analog inputs
  • Four Temperature (thermistor) inputs
  • Four User configurable analog inputs, (jumper selectable; 0-5v, thermistor, or RTD)
  • One dedicated fuel level input (0 to 250 ohm range)
  • Six Digital Inputs, active low, protected to ~18v, frequency, duty cycle or simple switch
  • One Tach Input
  • Two VR pair frequency inputs (crank, wheel or drive shaft speeds)
  • Jumper selectable CAN bus speeds, 250k,500k,1M
  • Jumper selectable terminating resistor
  • Jumper selectable header length, 11bit or 29 bit
  • Dimensions: 4.7” L x 4.3” W x 1.4” H (not including connector)
  • Weight: 6.4oz / 181.4g 

AEM 4 Port AEMnet CAN Hub

AEM’s 4 Port AEMnet CAN Hub is the perfect solution for connecting multiple AEMnet CAN bus-enabled devices together. This convenient Module provides a central docking station for four AEMnet cables via 4-way DTM-style housings and can provide power to all of the connected devices on the Hub through a single port (3A max current capacity – NOT for use to power UEGO sensor heaters). Users can daisy-chain two 4 Port AEMnet CAN Hubs together for a total of 6 connected devices.

AEMnet buses must be properly terminated using termination resistors on each end of the port (120 Ohms each, see Specs tab for AEM Devices with termination resistors). AEM offers DTM-style 4-pin termination plugs that simplify this process if you have a device that does not have an integrated or selectable termination resistor.

The 4 Port CAN hub is IP67-rated and can be installed in the engine compartment. Mounting hardware and instructions are included.

Features:

  • Easily connect and power multiple AEMnet CAN devices from a central docking station!
  • Four integrated 4-way DTM-style housings provide reliable AEMnet CAN connections
  • Daisy chain two Hubs to connect six AEMnet Devices
  • Compact enclosure - 3.45” (87.63mm) Long x 1.18” (29.85mm) Tall
  • Safe for engine bay mounting – IP67-rated enclosure
  • Mounting hardware included (two 4-40 x 7/8” flat head screws, two 4-40 x 0.375” washers and two 4-4 x 9/64” Nylock nuts)

POWERING DEVICES THROUGH THE 4 PORT AEMNET CAN HUB:

All 4 Port AEMnet Hub ports have the same pinout, so power and ground is only necessary on one port when powering devices through the Hub. IMPORTANT: The Hub has a max current capacity of 3A (do NOT attempt to distribute UEGO sensor heater power through the Hub).

PROPER BUS TERMINATION:

AEMnet buses must be properly terminated for proper operation. The termination resistors are 120 Ohms each and must be located at the physical ends of the bus wires (two total). Please refer below for Termination Resistor availability by AEMnet-enabled device:

AEMnet DeviceConfiguration
30-71XX Infinity ECUHardware enabled by default on CAN A (AEMnet)
Series 2 EMSHardware enabled by default (AEMnet)
30-56XX and 30-57XX CD Carbon Digital Dash DisplaysSoftware selectable, enabled by default
30-25XX AQ-1 Data LoggersIncluded, non configurable
30-2226 6 Channel CAN Sensor ModuleNo resistor
30-2224 22 Channel CAN Sensor ModuleJumper Selectable
30-2224 8 Channel K-Type EGT CAN ModuleNo resistor
30-03XX X-Series GaugesNo resistor
30-49XX Wideband Failsafe GaugesNo resistor

Termination resistors are available to simplify bus termination if your devices do not have a resistor:

DTM 4-pin Termination Resistor PNDescription
35-3440-FAEMnet Termination Plug, Female
35-3440-MAEMnet Termination Plug, Male

AEM 6 Channel CAN Sensor Module

AEM 6 Channel CAN Sensor Module

AEM’s 6 Channel CAN Sensor Module provides an affordable and easy way to add temperature, pressure, fuel level, and tachometer signals on to a CD Carbon Digital dash through AEMnet CAN bus! It supports the Bosch CAN 2.0b standard, making it compatible with many third-party devices that accept a programmable CAN bus input, which also allows you to add additional channels to a non-AEM ECU, dash or logger.

AN EASY, AFFORDABLE WAY TO ADD CHANNELS TO CD CARBON DASHES!

Carbureted Vehicles - The 6 Channel CAN Sensor Module provides the basic channels that users need to get data onto a CD Carbon Digital Dash in a carbureted vehicle, including tachometer, fuel level, and pressure/temp sensors. Vehicle speed can be achieved by using a GPS-enabled dash or by adding a Vehicle Dynamics Module.

08-Up Stock/Reflashed ECUs – This module is the perfect add-on for CD Carbon Dash owners who are sending channels to a CD Carbon Dash from an OBDII CAN stock ECU and want to add additional channels that are not available through the factory CAN stream.

Standalone CAN-based EFI – Racers who are using a non-AEM CAN-based programmable ECU and have consumed all of the inputs can use this module to add additional channels to the dash that they want to see or log (logging requires CD Carbon Logging Dash).

WHAT YOU GET
The 6 Channel CAN Sensor Module includes two 0-5v analog inputs, two temp inputs, RPM input, and fuel level input. The enclosure is IP67-rated and the unit is dustproof/water-resistant. A 12-Pin DTM-style connector and pins are included. Please see the Features tab for more info.

  • Two (2) temperature (thermistor) inputs
  • Two (2) dedicated 0-5V analog inputs
  • One (1) dedicated fuel level input (0 to 250 Ohm range)
  • One (1) tachometer/coil input
  • Fixed CAN bus speed, header length, and base address
  • IP67 Potted Enclosure / Sealed Connector - "dust tight" and protected against water spray
  • Protected inputs

AEM 8 Channel K-Type EGT CAN Module

AEM's 8-Channel K-Type Thermocouple EGT CAN Module (PN 30-2224) allows racers and enthusiasts to install eight K-type thermocouple sensors onto their vehicle and transmit all 8 temp channels to a CD Carbon Digital Dash or 3rd Party programmable CAN device via a one-plug CAN bus connection. It connects out of the box to AEM’s CD Digital Dashes and it can be configured to send data to virtually any CAN-based receiving device that has programmable CAN bus capability!

The 8-Channel K-Type EGT CAN Module includes eight K-type thermocouple inputs that use miniature K-type connectors. It accepts up to eight K-type thermocouple sensors (PN 30-2068, sold separately in 1-, 2- and 4-packs) which can be used for viewing and logging various temperatures including exhaust gas temps (EGTs), cylinder head temps, pre and post intercooler temps, air temps, water temps, fluid temps, disc brake temps and more. The 8-Channel K-Type EGT CAN Module can be daisy chained to a second module allowing users to receive up to 16 temperature channels through the same CAN bus connection!

HIGHLY ACCURATE AND INTELLIGENT

The 8-Channel K-Type EGT CAN Module uses an integrated cold junction sensor to ensure lab-grade temperature readings across all eight channels. It has the ability to read better than 1% full scale, even at the extremes of the temperature range (-200 to 1372 degC/-328 to 2501 degF). The Module also includes open circuit/fault detection to notify you if a sensor loses its connection and/or needs to be replaced.

WORKS WITH NON-AEM DEVICES WITH CONFIGURABLE CAN BUS!

The Module utilizes flexible CAN configuration jumpers which allow it to be used with just about any 3rd party devices that have a configurable CAN bus. Selectable parameters include CAN bus speeds (250k, 500k, 1M), selectable header length (11- or 29-bit) and selectable base address, which allows two units to be daisy-chained together on the same bus.

Power is supplied from the 4-pin DTM connector when paired with a CD-5 Carbon or CD-7 Digital Dash, but may require wiring to a power source on 3rdparty devices that do not provide power from the connected CAN device. AEM provides 4-way DTM-style connector plug in the kit to simplify the connection to non-AEM devices). AEMnet CAN bus extension cables are available separately in 2, 5- and 10-foot lengths.

Features:

  • Includes 8 K-type thermocouple inputs to accept common K-type thermocouple sensors (sensors sold separately)
  • Uses common miniature thermocouple sockets
  • Daisy-chain two modules together for up to 16 temp inputs through a single plug!
  • Outputs all channels via configurable CAN bus via one-plug connection (DTM-style Connection Cables sold separately in various lengths)
  • Pre-configured AEMnet CAN bus for plug & play connection to CD Digital Dashes (not compatible with Infinity, Series 2 or AQ-1 at this time)
  • Cold junction compensated for lab-grade accuracy (+/- 0.15% full scale)
  • Measures temperatures from -200 to 1372 degC (-328 to 2501 degF)
  • Temperature resolution 0.1 degC (0.18 degF)
  • Integrated open circuit/fault detection
  • Includes 8-Channel K-Type EGT CAN Module, 4-Pin DTM-style Connector Plug, instructions and Velcro for in-vehicle mounting

AEM AQ-1 Data Logger

AEM AQ-1 Data Logger

AEM’s AQ-1 Data Logger is easy to use, feature packed, and with an approximate street price of $395 is less than half the cost of most competitive data loggers. With logging rates of up to 1000HZ (1000 samples/second) per channel, the AQ-1 is one of the fastest data loggers on the market, and it comes with 2GB of logging memory standard. It features an internal 3-axis accelerometer, a removable SD card for virtually unlimited logging (up to 32GB capable), and includes an available RS-232 serial input for adding an NMEA GPS device.

The AQ-1 Data Logger is the ideal entry level data logger for virtually all forms of racing and Motorsports because it installs easily, can read live parameters from ancillary sensors, AEMnet enabled devices, GPS and more, and put them into a single log make your data easy to view. Whether you race a late model EFI-equipped OR carbureted vehicle, the AQ-1 is the ideal solution for your data acquisition needs.

The AQ-1 Data Logger is the ideal logger upgrade for current AEM Series-2 and EMS-4 users. The AQ-1 can receive data from the Series-2 and EMS-4 via the AEMnet CAN output. This allows users to expand their logging up to 32GB, while enjoying lightning fast downloads and all the features available in AEMdata, including video overlays!

AEMnet CANbus DEVICES SUPPORTED BY AQ-1 SOFTWARE VERSION 1.7

30-0300 X-Series Wideband UEGO AFR Gauge (LSU4.9)
30-0301 X-Series Oil/Fuel Pressure Gauge 0 to 100psi / 0 to 7bar
30-0302 X-Series Oil/Transmission/Water Temperature Gauge 100 to 300F / 40 to 150C
30-0305 X-Series EGT Gauge 0 to 1800F / 0 to 1000C
30-0306 X-Series Boost Gauge -30inHg to 35psi / -1 to 2.5bar
30-0307 X-Series Oil Pressure Gauge 0 to 150psi / 0 to 10bar
30-0308 X-Series Boost Gauge -30inHg to 60psi / -1 to 4bar
30-0309 X-Series Boost/Fuel Pressure Gauge 0 to 15psi SAE Only
30-0310 X-Series Inline Wideband UEGO AFR Controller (LSU4.9)
30-0313 X-Series GPS Speedometer Gauge 0 to 160mph / 0 to 260kph
30-2203 Vehicle Dynamics Module
30-2340 4 Channel Wideband UEGO Controller
30-4900 Wideband Failsafe Gauge
30-4911 Flex Fuel Wideband Failsafe
30-6905 Universal Programmable Engine Manement System. EMS 4
30-71XX Infinity ECU (All models and firmwares)
N/A Series 2 Plug & Play Engine Management System

The AQ-1 Data Logger includes three switched/digital inputs, four 0-5 V analog inputs with optional pullup resistor for RTD/Thermistor-style sensors, four additional analog inputs that can optionally be used to measure RPM or other frequency-based signals, and AEMnet (a high speed communications network that links enabled AEM products together) capability for direct connection to a 4-Channel UEGO controller, AEM Series2 EMS or other future AEMnet enabled devices.

EASY INSTALL & SET UP
AEM offers a flying lead harness AQ-1 Data Logger with a weather-proof connector and labeled wires for easy installation (sold separately). Its compact size makes it easy to install (4.80” x 4.55” x 1.44”), and its rugged enclosure features a weather resistant dust cover for added durability.

The AQ-1 Data Logger interfaces via USB connection to a laptop, and the included software is easy to use with detailed configuration screens to simplify set up and use. Log files are generated for use with AEMdata, AEM’s proven software analysis program.

  • Intuitive software
  • Removable SD card for virtually unlimited logging (2GB card included, supports cards up to 32GB)
  • Log virtually any engine parameter, TPS, APP, shock travel, clutch pressure, brake pressure and more!
  • Three switched-to-ground inputs for clutch, brake, cooling fan ground switch, nitrous solenoid ground or ground switch to start and stop AQ-1 Logger (ground activated input)
  • Track mapping capability




AEM AQ-1 OBDII Data Logger

AEM AQ-1 OBDII Data Logger

The AQ-1 OBDII Data Logger (PN 30-2501) and AQ-1 OBDII wiring harness (PN 30-2907-96) may be the ultimate data acquisition device for sportsman racers and track day enthusiasts with 2008-up model year vehicles! It reads and records data from a 2008-up vehicle’s OBDII port using a supplied connector on the harness, providing critical engine and chassis data with minimal wiring. Just power the unit, configure the OBDII data in the free setup software and it’s ready to start logging. It also has the ability to read and clear diagnostic trouble codes (DTCs) from the OBDII port.

In addition to reading data from a vehicle's OBDII port, the AQ-1 OBDII Data Logger includes 8 analog input channels, 3 switched digital inputs, a serial port for GPS, an on-board 3-axis accelerometer and AEMnet CAN bus cable for daisy-chaining AEMnet equipped devices into the logger and storing all data in one file! See available AEMnet devices below.

AEMnet CANbus DEVICES SUPPORTED BY AQ-1 SOFTWARE VERSION 1.7

30-0300 X-Series Wideband UEGO AFR Gauge (LSU4.9)
30-0301 X-Series Oil/Fuel Pressure Gauge 0 to 100psi / 0 to 7bar
30-0302 X-Series Oil/Transmission/Water Temperature Gauge 100 to 300F / 40 to 150C
30-0305 X-Series EGT Gauge 0 to 1800F / 0 to 1000C
30-0306 X-Series Boost Gauge -30inHg to 35psi / -1 to 2.5bar
30-0307 X-Series Oil Pressure Gauge 0 to 150psi / 0 to 10bar
30-0308 X-Series Boost Gauge -30inHg to 60psi / -1 to 4bar
30-0309 X-Series Boost/Fuel Pressure Gauge 0 to 15psi SAE Only
30-0310 X-Series Inline Wideband UEGO AFR Controller (LSU4.9)
30-0313 X-Series GPS Speedometer Gauge 0 to 160mph / 0 to 260kph
30-2203 Vehicle Dynamics Module
30-2340 4 Channel Wideband UEGO Controller
30-4900 Wideband Failsafe Gauge
30-4911 Flex Fuel Wideband Failsafe Gauge
30-6905 Universal Programmable Engine Manement System. EMS 4 (available upgrade path)
30-71XX Infinity ECU (All models and firmwares, available upgrade path)
N/A Series 2 Plug & Play Engine Management System (available upgrade path)


EXPANDABILITY
The AQ-1 OBDII Data Logger includes an on-board 3-axis accelerometer and is expandable through eight supplied analog inputs, three switched digital inputs, AEMnet CAN bus, and an RS232 serial connection. These allow you to add specific channels that may not be present on the OBDII datastream including:

  • Four 0-5V analog inputs with software selectable 2.2k pullup resistor for thermistor (temp) sensors. 0-5v examples: AFR, Boost, Boost before/after intercooler, MAP, Exhaust Backpressure, Crankcase Pressure, Fuel Pressure, Oil Pressure, Clutch Pressure, Brake Pressure, Shock Travel. Thermistor examples: Air Temp, Coolant Temp, EGT, Trans Temp
  • Four 0-5V/0-16.5V analog or Frequency inputs for all of the above plus RPM, Driveshaft Speed, Wheel Speed and Turbo Speed
  • Three switched digital inputs for Clutch Switch, Line Lock, Nitrous Switch, Line Lock, etc.
  • RS232 Serial connection for GPS, older AEM engine management systems that transmit data through serial, etc.
  • AEMnet CAN bus for daisy chaining X-Series Wideband Controllers and performance gauges, 4-Channel Wideband AFR Controller and Wideband Failsafe gauges, Vehicle Dynamics Module to add GPS and gyrometer, or Infinity ECU, Series 2 or EMS-4 EMS systems (future upgrade path)

EASY SET UP
AEM’s AQ-1 Setup Software is intuitive and easy to use. Configuring the OBDII data is as simple as connecting permanent power, switched power and ground, connecting the OBDII plug and connecting the AQ-1 OBDII Data Logger to the vehicle. On average 20-40 data channels are transmitted. Simply select the channels you wish to log from the datastream, set the logging rate, name the channels if they are not already named and it is ready to go.

The setup screen is broken into a Navigation Tree for your available input channels, Device Info area for data rate and available memory, a Status Bar and a Center Pane to enable and name available logging channels. Setting logging conditions, channel options, calibration data, lap beacons, reading battery voltage, configuring the accelerometer and serial input and more are found in easily navigable subpages.

The inclusion of an AEMnet CANbus input allows for the addition of multiple channels from AEMnet equipped devices through a simple one plug connection. Adding GPS for track mapping with a Vehicle Dynamics Module (VDM), wideband AFR, pressure or temp data from X-Series Digital Performance Gauges, individual cylinder AFR from 4-Channel Wideband Controllers, engine data from an Infinity ECU or Series 2/EMS-4 Programmable Engine Management System and more is all possible without the need to wire additional inputs into the unit.

FREE AEMdata ANALYSIS SOFTWARE
AEMdata analysis software features advanced 3D graphics and a user-friendly interface. It allows users to review and playback vehicle, driver or engine data and overlay this data using charts, dash displays, gauges, or custom displays that you create, or you can select pre-defined templates. All channels are listed in the AEMdata set up menu. Users simply drag and drop the channel that they want to analyze into the window and it will display. AEMdata has powerful features including custom math channels, x/y plots and histograms, stage or circuit modes and more, all aimed at making sure you get the most out of your data. Track mapping is achieved through GPS or a combination of vehicle speed and accelerometer data, and adding data overlays to HD video is possible using the software’s powerful video encoding feature.

AQ-1 OBDII Data Logger Features:

  • Reads/logs channels from the OBDII port of 2008-up vehicles!
  • All data (OBDII, sensors, daisy-chain) saved to single log file with real-time clock!Reads and clears trouble codes
  • Easy to set up using intuitive free Setup software
  • Four analog inputs for measuring frequency (RPM), 0-5 V or 0-16.5 V
  • Four 0-5 V analog inputs with optional pullup resistor for RTD/Thermistor-style sensor
  • Three switched digital inputs, 16.5 V MAX
  • AEMnet connection included for easy connection to AEMnet enabled devices
  • RS-232 serial input included for adding NMEA0183 GPS device
  • Internal 3-axis accelerometer (+/- 4g MAX)
  • Logging rates of up to 1000 samples/second per channel
  • 2GB removable SD card included for log files (Up to 32GB compatible)
  • Compact size (4.8" x 4.55" x 1.44") and weather resistant when included protective outer boot is used
  • Track mapping capability
  • Data downloadable via USB port on the AQ-1, weatherproof USB bulkhead in harness or by pulling the SD card
  • Free AEMdata analysis software with HD video encoding for adding data overlays to videos



Showing 1 to 6 of 6 (1 Pages)