Welcome visitor.

Gauges / Displays

Refine Search


AEM X-Series Wideband UEGO AFR Sensor Controller Gauge Accessory Kit
AEM X-Series Wideband UEGO AFR Sensor Controller Gauge Accessory Kit

AEM X-Series Wideband UEGO AFR Sensor Controller Gauge Accessory Kit

AEM X-Series Wideband UEGO AFR Sensor Controller Gauge Accessory KitX-SERIES WIDEBAND UEGO CONTROLLE..

$12.99
$9.35

AEM 52mm Boost Digital Gauge -30-35psi
AEM 52mm Boost Digital Gauge -30-35psi

AEM 52mm Boost Digital Gauge -30-35psi

AEM 52mm Boost Digital Gauge -30-35psiAEM's Digital Boost Display Gauges combine unsurpassed accur..

$229.19
$165.01

AEM 52mm Boost Digital Gauge -30-50psi
AEM 52mm Boost Digital Gauge -30-50psi

AEM 52mm Boost Digital Gauge -30-50psi

AEM 52mm Boost Digital Gauge -30-50psiAEM's Digital Boost Display Gauges combine unsurpassed accur..

$330.40
$237.88

AEM Analog -30inHg to 35psi Boost Gauge(US)
AEM Analog -30inHg to 35psi Boost Gauge(US)

AEM Analog -30inHg to 35psi Boost Gauge(US)

AEM Analog -30inHg to 35psi Boost Gauge(US)AEM's Analog style Boost Display Gauges feature quick r..

$239.60
$172.51

AEM Analog 0-1800F EGT Gauge
AEM Analog 0-1800F EGT Gauge

AEM Analog 0-1800F EGT Gauge

AEM Analog 0-1800F EGT Gauge AEM's Analog style 0-1800 F Exhaust Gas Temperature (EGT) Gauge featu..

$291.43
$209.83

AEM Analog 100-300F Oil / Water / Trans Temperature Gauge
AEM Analog 100-300F Oil / Water / Trans Temperature Gauge

AEM Analog 100-300F Oil / Water / Trans Temperature Gauge

AEM Analog 100-300F Oil / Water / Trans Temperature GaugeAEM's Analog style 100-300 F Oil Temperat..

$248.95
$179.25

AEM Analog 100psi Oil / Fuel Pressure Gauge (US)
AEM Analog 100psi Oil / Fuel Pressure Gauge (US)

AEM Analog 100psi Oil / Fuel Pressure Gauge (US)

AEM Analog 100psi Oil / Fuel Pressure Gauge (US)AEM's Analog style Oil Pressure Gauges feature qui..

$330.40
$237.88

AEM Analog 150psi Oil Pressure Gauge (US)
AEM Analog 150psi Oil Pressure Gauge (US)

AEM Analog 150psi Oil Pressure Gauge (US)

AEM Analog 150psi Oil Pressure Gauge (US)AEM's Analog style Oil Pressure Gauges feature quick resp..

$330.40
$237.88

AEM Analog 60psi Boost Gauge (US)
AEM Analog 60psi Boost Gauge (US)

AEM Analog 60psi Boost Gauge (US)

AEM Analog 60psi Boost Gauge (US)AEM's Analog style Boost Display Gauges feature quick response an..

$287.30
$206.85

AEM Analog 8-18V Volts Gauge
AEM Analog 8-18V Volts Gauge

AEM Analog 8-18V Volts Gauge

AEM Analog 8-18V Volts GaugeAEM's Analog style 8-18V Voltmeter Gauge features quick response and s..

$170.03
$122.42

AEM Analog E85 Wideband Air / Fuel Gauge 5.7 to 11.9:1AFR
AEM Analog E85 Wideband Air / Fuel Gauge 5.7 to 11.9:1AFR

AEM Analog E85 Wideband Air / Fuel Gauge 5.7 to 11.9:1AFR

AEM Analog E85 Wideband Air / Fuel Gauge 5.7 to 11.9:1AFRAEM’s Analog-Style Wideband UEGO AFR Gaug..

$346.91
$249.78

AEM Analog SAE 0-15psi Boost / Fuel Pressure Gauge (US)
AEM Analog SAE 0-15psi Boost / Fuel Pressure Gauge (US)

AEM Analog SAE 0-15psi Boost / Fuel Pressure Gauge (US)

AEM Analog SAE 0-15psi Boost / Fuel Pressure Gauge (US)AEM's Analog style Boost Display Gauges fea..

$239.60
$172.51

AEM Bosch Fuel Injector Plug Kit w/ 4 Connectors & Leads
AEM Bosch Fuel Injector Plug Kit w/ 4 Connectors & Leads

AEM Bosch Fuel Injector Plug Kit w/ 4 Connectors & Leads

AEM Bosch Fuel Injector Plug Kit w/ 4 Connectors & LeadsThe Bosch Fuel Injector plug & pin..

$37.21
$26.79

AEM Cam Angle Sensor Disk for Nissan SR20DET RWD KA24DE (50mm OD)
AEM Cam Angle Sensor Disk for Nissan SR20DET RWD KA24DE (50mm OD)

AEM Cam Angle Sensor Disk for Nissan SR20DET RWD KA24DE (50mm OD)

AEM Cam Angle Sensor Disk for Nissan SR20DET RWD KA24DE (50mm OD)AEM cam angle sensor discs are for ..

$46.14
$33.22

AEM Cam Angle Sensor Disk for RB25DET / VG / Some RB26 Engines (50mm OD)
AEM Cam Angle Sensor Disk for RB25DET / VG / Some RB26 Engines (50mm OD)

AEM Cam Angle Sensor Disk for RB25DET / VG / Some RB26 Engines (50mm OD)

AEM Cam Angle Sensor Disk for RB25DET / VG / Some RB26 Engines (50mm OD)AEM cam angle sensor discs a..

$46.14
$33.22

AEM Cam Angle Sensor Disk for SR20DET Pulsar GTiR (54mm OD)
AEM Cam Angle Sensor Disk for SR20DET Pulsar GTiR (54mm OD)

AEM Cam Angle Sensor Disk for SR20DET Pulsar GTiR (54mm OD)

AEM Cam Angle Sensor Disk for SR20DET Pulsar GTiR (54mm OD)AEM cam angle sensor discs are for use wi..

$46.14
$33.22

AEM CD-5 Carbon Non-Logging/Non GPS Digital Display Dash
AEM CD-5 Carbon Non-Logging/Non GPS Digital Display Dash

AEM CD-5 Carbon Non-Logging/Non GPS Digital Display Dash

AEM CD-5 Carbon Non-Logging/Non GPS Digital Display DashOVERVIEWCD-5 Carbon Digital Dash Displays fe..

$1,387.50
$999.00

AEM CD-5 Flat Panel Carbon Logging / GPS Digital Dash Display
AEM CD-5 Flat Panel Carbon Logging / GPS Digital Dash Display

AEM CD-5 Flat Panel Carbon Logging / GPS Digital Dash Display

AEM CD-5 Flat Panel Carbon Logging / GPS Digital Dash DisplayCD-5 Carbon Flat Panel Digital Dash Dis..

$1,861.10
$1,339.99

AEM CD-5 Flat Panel Carbon Logging / Non-GPS Digital Dash Display
AEM CD-5 Flat Panel Carbon Logging / Non-GPS Digital Dash Display

AEM CD-5 Flat Panel Carbon Logging / Non-GPS Digital Dash Display

AEM CD-5 Flat Panel Carbon Logging / Non-GPS Digital Dash DisplayCD-5 Carbon Flat Panel Digital Dash..

$1,722.21
$1,239.99

AEM CD-5 Flat Panel Carbon Non-Logging / GPS Digital Dash Display
AEM CD-5 Flat Panel Carbon Non-Logging / GPS Digital Dash Display

AEM CD-5 Flat Panel Carbon Non-Logging / GPS Digital Dash Display

AEM CD-5 Flat Panel Carbon Non-Logging / GPS Digital Dash DisplayCD-5 Carbon Flat Panel Digital Dash..

$1,444.44
$1,040.00

AEM CD-5 Flat Panel Carbon Non-Logging / Non-GPS Digital Dash Display
AEM CD-5 Flat Panel Carbon Non-Logging / Non-GPS Digital Dash Display

AEM CD-5 Flat Panel Carbon Non-Logging / Non-GPS Digital Dash Display

AEM CD-5 Flat Panel Carbon Non-Logging / Non-GPS Digital Dash DisplayCD-5 Carbon Flat Panel Digital ..

$1,305.55
$940.00

AEM CD-5G Carbon Non-Logging w/ Internal GPS Digital Display Dash
AEM CD-5G Carbon Non-Logging w/ Internal GPS Digital Display Dash

AEM CD-5G Carbon Non-Logging w/ Internal GPS Digital Display Dash

AEM CD-5G Carbon Non-Logging w/ Internal GPS Digital Display DashOVERVIEWCD-5 Carbon Digital Dash Di..

$1,549.28
$1,115.48

AEM CD-5L Carbon Logging Digital Dash Display
AEM CD-5L Carbon Logging Digital Dash Display

AEM CD-5L Carbon Logging Digital Dash Display

AEM CD-5L Carbon Logging Digital Dash DisplayOVERVIEWCD-5 Carbon Digital Dash Displays feature a ful..

$1,831.22
$1,318.48

AEM CD-5LG Carbon Logging w/ Internal GPS Digital Display Dash
AEM CD-5LG Carbon Logging w/ Internal GPS Digital Display Dash

AEM CD-5LG Carbon Logging w/ Internal GPS Digital Display Dash

AEM CD-5LG Carbon Logging w/ Internal GPS Digital Display DashOVERVIEWCD-5 Carbon Digital Dash Displ..

$1,972.20
$1,419.98

AEM CD-7 Carbon Logging / Non-GPS Digital Dash Display
AEM CD-7 Carbon Logging / Non-GPS Digital Dash Display

AEM CD-7 Carbon Logging / Non-GPS Digital Dash Display

AEM CD-7 Carbon Logging / Non-GPS Digital Dash DisplayAEM has updated its CD-7 Digital Dash Display ..

$2,395.12
$1,724.49


AEM X-Series Wideband UEGO AFR Sensor Controller Gauge Accessory Kit

AEM X-Series Wideband UEGO AFR Sensor Controller Gauge Accessory Kit

X-SERIES WIDEBAND UEGO CONTROLLER FEATURES:

  • X-Series Wideband UEGO AFR Controller Gauge were fastest responding wideband air/fuel ratio controllers in an independent test vs. 17 competitor wideband AFR controllers
  • Includes Bosch 4.9LSU wideband UEGO sensor
  • Factory calibrated resistor does not require free-air calibration, but technology allows for free-air calibration as sensor ages if user desires
  • Compatible with vehicle/system voltages up to 16V
  • 0-5V & RS232 output for data logging and feedback control, AEMnet (CANbus) for data logging and daisy-chaining multiple controllers up to 16 cylinders
  • Can display AFR values in hundredths of %
  • 52mm gauge diameter and slim 0.825” gauge depth
  • Gauge cup depth only .200” deep!
  • Auto dimming feature
  • User configurable display via buttons on the gauge face for changing AFR values, Lambda and O2%, and 3- or 4-digit display
  • Black bezel and black dual faced faceplate included (gauge only, silver bezel/white gauge option sold separately, PN 30-0300-ACC)
  • Locking connectors

*Does not include gauge*




AEM 52mm Boost Digital Gauge -30-35psi

AEM 52mm Boost Digital Gauge -30-35psi

AEM's Digital Boost Display Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays boost in 1 PSI increments, and a sweeping LED "needle" that lines the edge and moves as boost from 0 to up to 50 PSI. The boost gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.

AEM's digital boost gauges include a 0-5v analog output for use with data loggers and virtually any engine management system, such as the Infinity ECU, Series 2 EMS or AQ-1 Data Logger, making it the perfect solution for users who need to monitor and data log boost at high RPM on tuned engines. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge.

NOTE: For boost control solutions please see our TRU-BOOST Controller Gauge.

  • Ideal for carbureted or EFI vehicles
  • Easy-to-install Plug & Play harness and sensor included
  • 24 green LED display lights provide immediate reference to monitored engine function
  • Three digit readout in center
  • Each gauge comes with interchangeable black/silver bezels and black/white faceplates
  • 0-5V analog output included for use with data loggers and virtually any engine management system
  • Auto-dimming gauge face and read out lighting
  • Brass sensor included
  • Standard 52mm (2-1/16”) gauge housing
  • 30-4406 displays boost from -30 - 35 PSI
  • 30-4408 displays boost from -30 - 50 PSI




AEM 52mm Boost Digital Gauge -30-50psi

AEM 52mm Boost Digital Gauge -30-50psi

AEM's Digital Boost Display Gauges combine unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that displays boost in 1 PSI increments, and a sweeping LED "needle" that lines the edge and moves as boost from 0 to up to 50 PSI. The boost gauge's digital readout will automatically increase and decrease in intensity due to the built in ambient light sensing photocell.

AEM's digital boost gauges include a 0-5v analog output for use with data loggers and virtually any engine management system, such as the Infinity ECU, Series 2 EMS or AQ-1 Data Logger, making it the perfect solution for users who need to monitor and data log boost at high RPM on tuned engines. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge.

NOTE: For boost control solutions please see our TRU-BOOST Controller Gauge.

  • Ideal for carbureted or EFI vehicles
  • Easy-to-install Plug & Play harness and sensor included
  • 24 green LED display lights provide immediate reference to monitored engine function
  • Three digit readout in center
  • Each gauge comes with interchangeable black/silver bezels and black/white faceplates
  • 0-5V analog output included for use with data loggers and virtually any engine management system
  • Auto-dimming gauge face and read out lighting
  • Brass sensor included
  • Standard 52mm (2-1/16”) gauge housing
  • 30-4406 displays boost from -30 - 35 PSI
  • 30-4408 displays boost from -30 - 50 PSI




AEM Analog -30inHg to 35psi Boost Gauge(US)

AEM Analog -30inHg to 35psi Boost Gauge(US)

AEM's Analog style Boost Display Gauges feature quick response and smooth needle movement that is easy to read in all lighting conditions. AEM offers a 0-15 PSI boost gauge, -30 - 35 PSI boost gauge and 0-60 PSI boost gauge. Each gauge offers a swept area of 320 degrees for the best viewing resolution at almost any angle. A precision high-speed electronic stepper motor delivers lightning fast needle movement, making AEM's boost gauges some of the fastest and most accurate gauges available. An included sensor provides accurate boost readings for the gauge.

All AEM analog style gauges feature seven backlight colors that allow you to match your OEM or other gauge backlighting, a silver and black bezel and a white and black faceplate to best match the interior of your vehicle. The backlighting is adjustable via a dial on the rear of the gauge to optimize viewing in all lighting conditions.

  • Ideal for carbureted or EFI vehicles
  • Adjustable backlighting via a dial on the back of the gauge
  • Includes black and silver interchangeable bezels and white and black faceplates
  • 320 degree viewing area for unsurpassed resolution
  • Boost gauge includes high quality sensor - everything you need to install it!
  • Easy-to-install harness
  • 0-5v analog output included for use with data loggers and virtually any engine management system
  • Electronic stepper motor needle
  • Standard 52mm (2-1/16”) gauge housing
  • 30-5144 displays 0-15 PSI of boost
  • 30-5132 displays -30 - 35 PSI of boost
  • 20-5137 displays 0 - 60 PSI of boost
  • 30-5132M displays -1 - 2.4 BAR of boost
  • 30-5137M displays 0 - 4.1 BAR of boost


  • AEM Analog 0-1800F EGT Gauge

    AEM Analog 0-1800F EGT Gauge

    AEM's Analog style 0-1800 F Exhaust Gas Temperature (EGT) Gauge features quick response and smooth needle movement that is easy to read in all lighting conditions. This gauge offers a swept area of 320 degrees for the best viewing resolution at almost any angle. A precision high-speed electronic stepper motor delivers lightning fast needle movement, making AEM's EGT one of the fastest and most accurate gauges available. An included K-Type thermocouple sensor provides accurate temperature readings for the gauge.

    All AEM analog style gauges feature seven backlight colors that allow you to match your OEM or other gauge backlighting, a silver and black bezel and a white and black faceplate to best match the interior of your vehicle. The backlighting is adjustable via a dial on the rear of the gauge to optimize viewing in all lighting conditions.

    The 0-1800F EGT Gauge is a must for anyone with a gas or Diesel turbocharged engine who wants to monitor exhaust gas temperatures. Using an EGT gauge is a common method for monitoring a turbo's performance, as EGTs can climb to dangerous levels without any indication from boost levels or air/fuel ratio (AFR) readings.

    • Gauge readout from 100 to 300 Fahrenheit
    • Ideal for carbureted or EFI vehicles
    • Adjustable backlighting via a dial on the back of the gauge
    • Includes black and silver interchangeable bezels and white and black faceplates
    • 320 degree viewing area for unsurpassed resolution
    • Temperature gauge includes high quality K-Type Thermocouple sensor - everything you need to install it!
    • Easy-to-install harness
    • 0-5v analog output included for use with data loggers and virtually any engine management system
    • Electronic stepper motor needle
    • Standard 52mm (2-1/16”) gauge housing




    AEM Analog 100-300F Oil / Water / Trans Temperature Gauge

    AEM Analog 100-300F Oil / Water / Trans Temperature Gauge

    AEM's Analog style 100-300 F Oil Temperature Gauge features quick response and smooth needle movement that is easy to read in all lighting conditions. Each gauge offers a swept area of 320 degrees for the best viewing resolution at almost any angle. A precision high-speed electronic stepper motor delivers lightning fast needle movement, making AEM's SAE oil temperature gauge one of the fastest and most accurate gauges available. An included sensor provides accurate temperature readings for the gauge.

    All AEM analog style gauges feature seven backlight colors that allow you to match your OEM or other gauge backlighting, a silver and black bezel and a white and black faceplate to best match the interior of your vehicle. The backlighting is adjustable via a dial on the rear of the gauge to optimize viewing in all lighting conditions.

    This 100-300 F Oil Temperature Gauge can quickly alert you to an engine damaging rise in oil temperature. If you have invested in your engine, don't rely on the factory oil temp light warning.

    • Gauge readout from 100 to 300 Fahrenheit
    • Ideal for carbureted or EFI vehicles
    • Adjustable backlighting via a dial on the back of the gauge
    • Includes black and silver interchangeable bezels and white and black faceplates
    • 320 degree viewing area for unsurpassed resolution
    • Temperature gauge includes high quality sensor - everything you need to install it!
    • Easy-to-install harness
    • 0-5v analog output included for use with data loggers and virtually any engine management system
    • Electronic stepper motor needle
    • Standard 52mm (2-1/16”) gauge housing



    AEM Analog 100psi Oil / Fuel Pressure Gauge (US)

    AEM Analog 100psi Oil / Fuel Pressure Gauge (US)

    AEM's Analog style Oil Pressure Gauges feature quick response and smooth needle movement that is easy to read in all lighting conditions. AEM offers a 0-100 PSI oil pressure gauge and 0-150 PSI oil pressure gauge. Each gauge offers a swept area of 320 degrees for the best viewing resolution at almost any angle. A precision high-speed electronic stepper motor delivers lightning fast needle movement, making AEM's SAE oil pressure gauge some of the fastest and most accurate gauges available. An included sensor provides accurate pressure readings for each oil pressure gauge.

    All AEM analog style gauges feature seven backlight colors that allow you to match your OEM or other gauge backlighting, a silver and black bezel and a white and black faceplate to best match the interior of your vehicle. The backlighting is adjustable via a dial on the rear of the gauge to optimize viewing in all lighting conditions.

    AEM Oil Pressure Gauges can quickly alert you to an engine damaging drop in oil pressure, allowing you to protect your engine from damage.

    • Ideal for carbureted or EFI vehicles
    • Adjustable backlighting via a dial on the back of the gauge
    • Includes black and silver interchangeable bezels and white and black faceplates
    • 320 degree viewing area for unsurpassed resolution
    • Pressure gauge includes high quality sensor - everything you need to install it!
    • Easy-to-install harness
    • 0-5v analog output included for use with data loggers and virtually any engine management system
    • Electronic stepper motor needle
    • Standard 52mm (2-1/16”) gauge housing
    • 30-5133 displays 0-100 PSI
    • 30-5135 displays 0-150 PSI
    • 30-5133M displays 0-6.9 BAR
    • 30-5135M displays 0-10.2 BAR




    AEM Analog 150psi Oil Pressure Gauge (US)

    AEM Analog 150psi Oil Pressure Gauge (US)

    AEM's Analog style Oil Pressure Gauges feature quick response and smooth needle movement that is easy to read in all lighting conditions. AEM offers a 0-100 PSI oil pressure gauge and 0-150 PSI oil pressure gauge. Each gauge offers a swept area of 320 degrees for the best viewing resolution at almost any angle. A precision high-speed electronic stepper motor delivers lightning fast needle movement, making AEM's SAE oil pressure gauge some of the fastest and most accurate gauges available. An included sensor provides accurate pressure readings for each oil pressure gauge.

    All AEM analog style gauges feature seven backlight colors that allow you to match your OEM or other gauge backlighting, a silver and black bezel and a white and black faceplate to best match the interior of your vehicle. The backlighting is adjustable via a dial on the rear of the gauge to optimize viewing in all lighting conditions.

    AEM Oil Pressure Gauges can quickly alert you to an engine damaging drop in oil pressure, allowing you to protect your engine from damage.

    • Ideal for carbureted or EFI vehicles
    • Adjustable backlighting via a dial on the back of the gauge
    • Includes black and silver interchangeable bezels and white and black faceplates
    • 320 degree viewing area for unsurpassed resolution
    • Pressure gauge includes high quality sensor - everything you need to install it!
    • Easy-to-install harness
    • 0-5v analog output included for use with data loggers and virtually any engine management system
    • Electronic stepper motor needle
    • Standard 52mm (2-1/16”) gauge housing
    • 30-5133 displays 0-100 PSI
    • 30-5135 displays 0-150 PSI
    • 30-5133M displays 0-6.9 BAR
    • 30-5135M displays 0-10.2 BAR




    AEM Analog 60psi Boost Gauge (US)

    AEM Analog 60psi Boost Gauge (US)

    AEM's Analog style Boost Display Gauges feature quick response and smooth needle movement that is easy to read in all lighting conditions. AEM offers a 0-15 PSI boost gauge, -30 - 35 PSI boost gauge and 0-60 PSI boost gauge. Each gauge offers a swept area of 320 degrees for the best viewing resolution at almost any angle. A precision high-speed electronic stepper motor delivers lightning fast needle movement, making AEM's boost gauges some of the fastest and most accurate gauges available. An included sensor provides accurate boost readings for the gauge.

    All AEM analog style gauges feature seven backlight colors that allow you to match your OEM or other gauge backlighting, a silver and black bezel and a white and black faceplate to best match the interior of your vehicle. The backlighting is adjustable via a dial on the rear of the gauge to optimize viewing in all lighting conditions.

  • Ideal for carbureted or EFI vehicles
  • Adjustable backlighting via a dial on the back of the gauge
  • Includes black and silver interchangeable bezels and white and black faceplates
  • 320 degree viewing area for unsurpassed resolution
  • Boost gauge includes high quality sensor - everything you need to install it!
  • Easy-to-install harness
  • 0-5v analog output included for use with data loggers and virtually any engine management system
  • Electronic stepper motor needle
  • Standard 52mm (2-1/16”) gauge housing
  • 30-5144 displays 0-15 PSI of boost
  • 30-5132 displays -30 - 35 PSI of boost
  • 20-5137 displays 0 - 60 PSI of boost
  • 30-5132M displays -1 - 2.4 BAR of boost
  • 30-5137M displays 0 - 4.1 BAR of boost


  • AEM Analog 8-18V Volts Gauge

    AEM Analog 8-18V Volts Gauge

    AEM's Analog style 8-18V Voltmeter Gauge features quick response and smooth needle movement that is easy to read in all lighting conditions. This Volts gauge offers a swept area of 320 degrees for the best viewing resolution at almost any angle. A precision high-speed electronic stepper motor delivers lightning fast needle movement, making AEM's volt gauge one of the fastest and most accurate gauges available.

    All AEM analog style gauges feature seven backlight colors that allow you to match your OEM or other gauge backlighting, a silver and black bezel and a white and black faceplate to best match the interior of your vehicle. The backlighting is adjustable via a dial on the rear of the gauge to optimize viewing in all lighting conditions.

    The AEM 8-18V Volts Gauge is ideal for anyone who wants to know exactly how their charging system is performing at a quick glance. Most vehicle manufacturers only provide a warning light that illuminates when there is a problem with your vehicle's charging system, coming on once your system's voltage is so low that you can't restart the car after it stalls. With AEM's volts gauge you will know whether your charging system is failing the moment it starts to undercharge or overcharge.

    • Gauge readout from 8 to 18 volts
    • Ideal for carbureted or EFI vehicles
    • Adjustable backlighting via a dial on the back of the gauge
    • Includes black and silver interchangeable bezels and white and black faceplates
    • 320 degree viewing area for unsurpassed resolution
    • Easy-to-install harness included
    • 0-5v analog output included for use with data loggers and virtually any engine management system
    • Electronic stepper motor needle
    • Standard 52mm (2-1/16”) gauge housing




    AEM Analog E85 Wideband Air / Fuel Gauge 5.7 to 11.9:1AFR

    AEM Analog E85 Wideband Air / Fuel Gauge 5.7 to 11.9:1AFR

    AEM’s Analog-Style Wideband UEGO AFR Gauge is a wideband UEGO air/fuel ratio controller (AFR) and gauge in one. It unites accuracy, speed and control with an easy to read, digital LED display and sweeping LED “needle” that changes colors as AFR changes from rich to lean.

    Our analog-style gauge-type controller features 320 degrees of resolution for detecting even a tenth of a point change in AFR, and has a high-speed electric stepper motor for lightning-fast needle movement. The Analog Wideband gauge also features seven (7) user-selectable back lighting colors that allow you to match it to most factory gauge clusters. As with all of our Wideband Systems, they are fast and accurate.

    WHAT IS A WIDEBAND UEGO AIR/FUEL CONTROLLER?
    AEM's Wideband UEGO (Universal Exhaust Gas Oxygen, pronounced “You-Way-Go”) Controllers are powerful, cost effective tuning tools that allow users to accurately monitor the Air/Fuel Ratio (AFR) of their engine.

    WHY USE A WIDEBAND AIR/FUEL CONTROLLER?
    Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air/fuel controllers that can help ensure your vehicle is optimally tuned.

    WHAT IS FREE-AIR CALIBRATION?
    Some of our competitors require that you frequently perform a free-air calibration procedure to calibrate their O2 sensors. This process involves removing the sensor from the bung while still connected to the controller device, then waving the sensor in the air so it can read atmospheric O2 levels. We use Bosch 4.2LSU sensors in our wideband controllers. Our sensors are individually laboratory-calibrated by Bosch and never require free air calibration!

    CAN I CHANGE THE AEM UEGO SENSOR’S CONNECTOR?
    No. There is a laser-etched, calibrated resistor in the sensor’s connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor’s output.

    Our highly popular Analog-Style Wideband O2 air/fuel ratio UEGO gauge features a high-speed electric stepper motor for lightning-fast needle movement and a full 320 degrees of viewing resolution to detect even a .5 degree of change in AFR. Seven backlit colors allow you to match the lighting to most factory gauge clusters. A 52mm (2-1/16") gauge housing ensures that it will fit in most gauge pods and can be remotely mounted virtually anywhere. All AEM gauges feature a 0-5v analog output for use with data loggers and almost any engine management system.

    The Analog-Style Wideband O2 air/fuel ratio UEGO gauge is a must if you want to maximize your engine's power and safety. When tuning an engine, accurate air/fuel ratio data is critical because running with too rich of an AFR can cause a loss of power, and running a lean AFR can result in serious engine damage. AEM's Analog-Style Wideband AFR UEGO gauge can quickly alert you to even a .1 change in air/fuel ratio and provide enough time to shut down an engine before damage occurs.

    The Bosch UEGO sensor gives the controller its speed and accuracy. It is laboratory calibrated at the factory and NEVER requires free-air calibration when used with AEM wideband air/fuel controllers.

    • Interchangeable black and white faceplates included for customizing gauge appearance (digital gauges only)
    • Bosch 4.2 LSU wideband sensor and weld-in bung included
    • No free air sensor calibration required - ever
    • Interchangeable black and silver bezels included
    • Interchangeable black and white faceplates included
    • User-definable backlighting (Analog Only) to match most factory gauge clusters
    • 52mm (2-1/16”) gauge housing




    AEM Analog SAE 0-15psi Boost / Fuel Pressure Gauge (US)

    AEM Analog SAE 0-15psi Boost / Fuel Pressure Gauge (US)

    AEM's Analog style Boost Display Gauges feature quick response and smooth needle movement that is easy to read in all lighting conditions. AEM offers a 0-15 PSI boost gauge, -30 - 35 PSI boost gauge and 0-60 PSI boost gauge. Each gauge offers a swept area of 320 degrees for the best viewing resolution at almost any angle. A precision high-speed electronic stepper motor delivers lightning fast needle movement, making AEM's boost gauges some of the fastest and most accurate gauges available. An included sensor provides accurate boost readings for the gauge.

    All AEM analog style gauges feature seven backlight colors that allow you to match your OEM or other gauge backlighting, a silver and black bezel and a white and black faceplate to best match the interior of your vehicle. The backlighting is adjustable via a dial on the rear of the gauge to optimize viewing in all lighting conditions.

  • Ideal for carbureted or EFI vehicles
  • Adjustable backlighting via a dial on the back of the gauge
  • Includes black and silver interchangeable bezels and white and black faceplates
  • 320 degree viewing area for unsurpassed resolution
  • Boost gauge includes high quality sensor - everything you need to install it!
  • Easy-to-install harness
  • 0-5v analog output included for use with data loggers and virtually any engine management system
  • Electronic stepper motor needle
  • Standard 52mm (2-1/16”) gauge housing
  • 30-5144 displays 0-15 PSI of boost
  • 30-5132 displays -30 - 35 PSI of boost
  • 20-5137 displays 0 - 60 PSI of boost
  • 30-5132M displays -1 - 2.4 BAR of boost
  • 30-5137M displays 0 - 4.1 BAR of boost


  • AEM Bosch Fuel Injector Plug Kit w/ 4 Connectors & Leads

    AEM Bosch Fuel Injector Plug Kit w/ 4 Connectors & Leads


    The Bosch Fuel Injector plug & pin kit provided by AEM is accurate and affordable. This kit includes High-quality sealed sensor housings, a mating connector and 12" leads (for the sensors) when applicable.

    • Includes 4 connectors and 8 contacts



    AEM Cam Angle Sensor Disk for Nissan SR20DET RWD KA24DE (50mm OD)

    AEM Cam Angle Sensor Disk for Nissan SR20DET RWD KA24DE (50mm OD)

    AEM cam angle sensor discs are for use with AEM programmable engine management systems They are a direct replacement for the factory crank angle sensor disc in your Nissan. Before purchasing, be sure that the center of the AEM CAS disc looks exactly like the stock disc in your distributor. Be sure to match the hubs of your disc to the AEM disc before ordering.

    NOTE: The Series 2 30-6610 and 30-6620 EMSs include this disc. If you are purchasing one of the EMS units new you do not need to purchase a CAS disc. If you bought your Nissan Series 2 EMS used or are using a Series 1 EMS and are having 'sync' issues then this disc may eliminate them.

    • PN 30-8760 for SR20DET RWD, KA24DE (50mm OD)
    • PN 30-8761 for RB25DETT, VG and some RB26 engines (50MM OD)

    THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED BY SPECIFIC REGULATORY EXEMPTION.  IT IS THE RESPONSIBILITY OF THE INSTALLER AND/OR USER OF THIS PRODUCT TO ENSURE THAT IT IS USED IN COMPLIANCE WITH ALL APPLICABLE LAWS AND REGULATIONS.


    AEM Cam Angle Sensor Disk for RB25DET / VG / Some RB26 Engines (50mm OD)

    AEM Cam Angle Sensor Disk for RB25DET / VG / Some RB26 Engines (50mm OD)

    AEM cam angle sensor discs are for use with AEM programmable engine management systems They are a direct replacement for the factory crank angle sensor disc in your Nissan. Before purchasing, be sure that the center of the AEM CAS disc looks exactly like the stock disc in your distributor. Be sure to match the hubs of your disc to the AEM disc before ordering.

    NOTE: The Series 2 30-6610 and 30-6620 EMSs include this disc. If you are purchasing one of the EMS units new you do not need to purchase a CAS disc. If you bought your Nissan Series 2 EMS used or are using a Series 1 EMS and are having 'sync' issues then this disc may eliminate them.

    • PN 30-8760 for SR20DET RWD, KA24DE (50mm OD)
    • PN 30-8761 for RB25DETT, VG and some RB26 engines (50MM OD)

    THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED BY SPECIFIC REGULATORY EXEMPTION.  IT IS THE RESPONSIBILITY OF THE INSTALLER AND/OR USER OF THIS PRODUCT TO ENSURE THAT IT IS USED IN COMPLIANCE WITH ALL APPLICABLE LAWS AND REGULATIONS.


    AEM Cam Angle Sensor Disk for SR20DET Pulsar GTiR (54mm OD)

    AEM Cam Angle Sensor Disk for SR20DET Pulsar GTiR (54mm OD)

    AEM cam angle sensor discs are for use with AEM programmable engine management systems They are a direct replacement for the factory crank angle sensor disc in your Nissan. Before purchasing, be sure that the center of the AEM CAS disc looks exactly like the stock disc in your distributor. Be sure to match the hubs of your disc to the AEM disc before ordering.

    NOTE: The Series 2 30-6610 and 30-6620 EMSs include this disc. If you are purchasing one of the EMS units new you do not need to purchase a CAS disc. If you bought your Nissan Series 2 EMS used or are using a Series 1 EMS and are having 'sync' issues then this disc may eliminate them.

    • PN 30-8760 for SR20DET RWD, KA24DE (50mm OD)
    • PN 30-8761 for RB25DETT, VG and some RB26 engines (50MM OD)

    THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED BY SPECIFIC REGULATORY EXEMPTION.  IT IS THE RESPONSIBILITY OF THE INSTALLER AND/OR USER OF THIS PRODUCT TO ENSURE THAT IT IS USED IN COMPLIANCE WITH ALL APPLICABLE LAWS AND REGULATIONS.


    AEM CD-5 Carbon Non-Logging/Non GPS Digital Display Dash

    AEM CD-5 Carbon Non-Logging/Non GPS Digital Display Dash


    OVERVIEW

    CD-5 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.

    VIEW AND LOG DATA FROM OVER 250 CAN DEVICES!
    The CD-5 Carbon receives channels from two independent CAN bus inputs and it does not require special modules to read AEM and/or 3rd-party CAN signals. We have validated it to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port (see Supported Apps Tab), and the CD-5 Carbon can be added to any vehicle with the addition of our 22 Channel CAN Sensor Module. The CD-5 Carbon is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go! All channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screens or warning alerts.

    Third-party systems will require download of 3rd party DBC CAN bus protocol files for proper operation if they are not included in our setup software. We currently have over 250 validated 3rd party applications, and include a CD Dash Power Cable to simplify the installation of 3rd party devices. We have also developed 3rd Party Plug & Play Adapter Cables for certain applications, which are highlighted on our Supported Apps Tab and can be viewed on our Install Kits Tab.

    Four packages are available:

    • PN 30-5600, CD-5 Carbon Non-Logging/Non GPS Display
    • PN 30-5601, CD-5L Carbon Logging Display
    • PN 30-5602, CD-5G Carbon Non-Logging Display with Internal GPS
    • PN 30-5603, CD-5LG Carbon Logging Display with Internal GPS

    Features:

    • Full color 5” screen with 800x480 resolution
    • Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
    • Layout files interchangeable with all versions of the CD-7
    • Wiring interface/harness is identical to the CD-7
    • Rugged, lightweight flow-molded carbon fiber composite enclosure
    • Total display weight of 11.7 oz./331 grams
    • IP66 water resistance allows for operation in boats and motorcycles without worry
    • Accepts channels from two separate user programmable CAN bus connections – works with AEMnet enabled devices and non-AEM 3rd party devices side by side
    • Plug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs
    • Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
    • Install the CD-5 Carbon on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212, sold separately)
    • Available with or without 200Mb internal logging (up to 1,000Hz/channel)
    • Available with or without on-board GPS receiver and antenna
    • Add Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)
    • Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages
    • Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)
    • Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
    • Use included page layouts and input your channels and text, or create your own from scratch
    • Free DashDesign Graphics Editor software
    • Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
    • Two programmable LEDs
    • Odometer function
    • Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
    • ‘Headlight-in’ connection dims the dash and LEDs during night operation
    • Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
    • User supplied graphics can be changed based on channel values (up to the full screen size)
    • Convert CAN bus channel values to user-defined text in multiple languages

    AEM CD-5 Flat Panel Carbon Logging / GPS Digital Dash Display

    AEM CD-5 Flat Panel Carbon Logging / GPS Digital Dash Display


    CD-5 Carbon Flat Panel Digital Dash Displays are perfect for flush mount installation or in-dash enclosures with tight tolerances. They include all of the robust features found in the original CD-5 Carbon Dashes, but do not have buttons or an LED shade hood built into the enclosure.

    CD-5 Carbon Flat Panel Digital Dash Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the enclosure and are fully programmable.

    • Full color 5” screen with 800x480 resolution
    • Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
    • Layout files interchangeable between all CD Carbon Dashes
    • Wiring interface/harnesses are identical between all CD Carbon Dashes
    • Rugged, lightweight flow-molded carbon fiber composite enclosure
    • IP66 water resistance – open cockpit safe
    • Accepts channels from AEMnet CAN-enabled devices and non-AEM CAN bus devices side by side
    • Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages (requires Button Kit PN 30-3610)
    • Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)
    • Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
    • Use the included page layouts and input your channels and text, or create your own from scratch
    • Free DashDesign Graphics Editor software
    • Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
    • Two programmable LEDs
    • Odometer function
    • Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
    • ‘Headlight-in’ connection dims the dash and LEDs during night operation
    • Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
    • User supplied graphics can be changed based on channel values (up to the full screen size)
    • Convert CAN bus channel values to user-defined text
    • Plug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs
    • Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
    • Install on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212) or 6 Channel CAN Sensor Module (PN 30-2226)
    • Install 8 additional temp inputs and send them to the CD Carbon Dash with our 8 Channel K-Type EGT CAN Module (PN 30-2224, sold separately)
    • Available with or without 200Mb internal logging (up to 1,000Hz/channel)
    • Available with or without onboard 20 Hz GPS receiver and antenna
    • Add Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)



    AEM CD-5 Flat Panel Carbon Logging / Non-GPS Digital Dash Display

    AEM CD-5 Flat Panel Carbon Logging / Non-GPS Digital Dash Display


    CD-5 Carbon Flat Panel Digital Dash Displays are perfect for flush mount installation or in-dash enclosures with tight tolerances. They include all of the robust features found in the original CD-5 Carbon Dashes, but do not have buttons or an LED shade hood built into the enclosure.

    CD-5 Carbon Flat Panel Digital Dash Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the enclosure and are fully programmable.

    • Full color 5” screen with 800x480 resolution
    • Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
    • Layout files interchangeable between all CD Carbon Dashes
    • Wiring interface/harnesses are identical between all CD Carbon Dashes
    • Rugged, lightweight flow-molded carbon fiber composite enclosure
    • IP66 water resistance – open cockpit safe
    • Accepts channels from AEMnet CAN-enabled devices and non-AEM CAN bus devices side by side
    • Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages (requires Button Kit PN 30-3610)
    • Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)
    • Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
    • Use the included page layouts and input your channels and text, or create your own from scratch
    • Free DashDesign Graphics Editor software
    • Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
    • Two programmable LEDs
    • Odometer function
    • Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
    • ‘Headlight-in’ connection dims the dash and LEDs during night operation
    • Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
    • User supplied graphics can be changed based on channel values (up to the full screen size)
    • Convert CAN bus channel values to user-defined text
    • Plug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs
    • Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
    • Install on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212) or 6 Channel CAN Sensor Module (PN 30-2226)
    • Install 8 additional temp inputs and send them to the CD Carbon Dash with our 8 Channel K-Type EGT CAN Module (PN 30-2224, sold separately)
    • Available with or without 200Mb internal logging (up to 1,000Hz/channel)
    • Available with or without onboard 20 Hz GPS receiver and antenna
    • Add Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)



    AEM CD-5 Flat Panel Carbon Non-Logging / GPS Digital Dash Display

    AEM CD-5 Flat Panel Carbon Non-Logging / GPS Digital Dash Display


    CD-5 Carbon Flat Panel Digital Dash Displays are perfect for flush mount installation or in-dash enclosures with tight tolerances. They include all of the robust features found in the original CD-5 Carbon Dashes, but do not have buttons or an LED shade hood built into the enclosure.

    CD-5 Carbon Flat Panel Digital Dash Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the enclosure and are fully programmable.

    • Full color 5” screen with 800x480 resolution
    • Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
    • Layout files interchangeable between all CD Carbon Dashes
    • Wiring interface/harnesses are identical between all CD Carbon Dashes
    • Rugged, lightweight flow-molded carbon fiber composite enclosure
    • IP66 water resistance – open cockpit safe
    • Accepts channels from AEMnet CAN-enabled devices and non-AEM CAN bus devices side by side
    • Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages (requires Button Kit PN 30-3610)
    • Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)
    • Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
    • Use the included page layouts and input your channels and text, or create your own from scratch
    • Free DashDesign Graphics Editor software
    • Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
    • Two programmable LEDs
    • Odometer function
    • Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
    • ‘Headlight-in’ connection dims the dash and LEDs during night operation
    • Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
    • User supplied graphics can be changed based on channel values (up to the full screen size)
    • Convert CAN bus channel values to user-defined text
    • Plug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs
    • Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
    • Install on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212) or 6 Channel CAN Sensor Module (PN 30-2226)
    • Install 8 additional temp inputs and send them to the CD Carbon Dash with our 8 Channel K-Type EGT CAN Module (PN 30-2224, sold separately)
    • Available with or without 200Mb internal logging (up to 1,000Hz/channel)
    • Available with or without onboard 20 Hz GPS receiver and antenna
    • Add Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)



    AEM CD-5 Flat Panel Carbon Non-Logging / Non-GPS Digital Dash Display

    AEM CD-5 Flat Panel Carbon Non-Logging / Non-GPS Digital Dash Display

    CD-5 Carbon Flat Panel Digital Dash Displays are perfect for flush mount installation or in-dash enclosures with tight tolerances. They include all of the robust features found in the original CD-5 Carbon Dashes, but do not have buttons or an LED shade hood built into the enclosure.

    CD-5 Carbon Flat Panel Digital Dash Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the enclosure and are fully programmable.

    • Full color 5” screen with 800x480 resolution
    • Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
    • Layout files interchangeable between all CD Carbon Dashes
    • Wiring interface/harnesses are identical between all CD Carbon Dashes
    • Rugged, lightweight flow-molded carbon fiber composite enclosure
    • IP66 water resistance – open cockpit safe
    • Accepts channels from AEMnet CAN-enabled devices and non-AEM CAN bus devices side by side
    • Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages (requires Button Kit PN 30-3610)
    • Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)
    • Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
    • Use the included page layouts and input your channels and text, or create your own from scratch
    • Free DashDesign Graphics Editor software
    • Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
    • Two programmable LEDs
    • Odometer function
    • Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
    • ‘Headlight-in’ connection dims the dash and LEDs during night operation
    • Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
    • User supplied graphics can be changed based on channel values (up to the full screen size)
    • Convert CAN bus channel values to user-defined text
    • Plug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs
    • Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
    • Install on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212) or 6 Channel CAN Sensor Module (PN 30-2226)
    • Install 8 additional temp inputs and send them to the CD Carbon Dash with our 8 Channel K-Type EGT CAN Module (PN 30-2224, sold separately)
    • Available with or without 200Mb internal logging (up to 1,000Hz/channel)
    • Available with or without onboard 20 Hz GPS receiver and antenna
    • Add Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)



    AEM CD-5G Carbon Non-Logging w/ Internal GPS Digital Display Dash

    AEM CD-5G Carbon Non-Logging w/ Internal GPS Digital Display Dash

    OVERVIEW

    CD-5 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.

    VIEW AND LOG DATA FROM OVER 250 CAN DEVICES!
    The CD-5 Carbon receives channels from two independent CAN bus inputs and it does not require special modules to read AEM and/or 3rd-party CAN signals. We have validated it to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port (see Supported Apps Tab), and the CD-5 Carbon can be added to any vehicle with the addition of our 22 Channel CAN Sensor Module. The CD-5 Carbon is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go! All channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screens or warning alerts.

    Third-party systems will require download of 3rd party DBC CAN bus protocol files for proper operation if they are not included in our setup software. We currently have over 250 validated 3rd party applications, and include a CD Dash Power Cable to simplify the installation of 3rd party devices. We have also developed 3rd Party Plug & Play Adapter Cables for certain applications, which are highlighted on our Supported Apps Tab and can be viewed on our Install Kits Tab.

    Four packages are available:

    • PN 30-5600, CD-5 Carbon Non-Logging/Non GPS Display
    • PN 30-5601, CD-5L Carbon Logging Display
    • PN 30-5602, CD-5G Carbon Non-Logging Display with Internal GPS
    • PN 30-5603, CD-5LG Carbon Logging Display with Internal GPS

    Features:

    • Full color 5” screen with 800x480 resolution
    • Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
    • Layout files interchangeable with all versions of the CD-7
    • Wiring interface/harness is identical to the CD-7
    • Rugged, lightweight flow-molded carbon fiber composite enclosure
    • Total display weight of 11.7 oz./331 grams
    • IP66 water resistance allows for operation in boats and motorcycles without worry
    • Accepts channels from two separate user programmable CAN bus connections – works with AEMnet enabled devices and non-AEM 3rd party devices side by side
    • Plug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs
    • Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
    • Install the CD-5 Carbon on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212, sold separately)
    • Available with or without 200Mb internal logging (up to 1,000Hz/channel)
    • Available with or without on-board GPS receiver and antenna
    • Add Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)
    • Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages
    • Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)
    • Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
    • Use included page layouts and input your channels and text, or create your own from scratch
    • Free DashDesign Graphics Editor software
    • Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
    • Two programmable LEDs
    • Odometer function
    • Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
    • ‘Headlight-in’ connection dims the dash and LEDs during night operation
    • Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
    • User supplied graphics can be changed based on channel values (up to the full screen size)
    • Convert CAN bus channel values to user-defined text in multiple languages

    AEM CD-5L Carbon Logging Digital Dash Display

    AEM CD-5L Carbon Logging Digital Dash Display

    OVERVIEW
    CD-5 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.

    VIEW AND LOG DATA FROM OVER 250 CAN DEVICES!
    The CD-5 Carbon receives channels from two independent CAN bus inputs and it does not require special modules to read AEM and/or 3rd-party CAN signals. We have validated it to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port (see Supported Apps Tab), and the CD-5 Carbon can be added to any vehicle with the addition of our 22 Channel CAN Sensor Module. The CD-5 Carbon is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go! All channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screens or warning alerts.

    Third-party systems will require download of 3rd party DBC CAN bus protocol files for proper operation if they are not included in our setup software. We currently have over 250 validated 3rd party applications, and include a CD Dash Power Cable to simplify the installation of 3rd party devices. We have also developed 3rd Party Plug & Play Adapter Cables for certain applications, which are highlighted on our Supported Apps Tab and can be viewed on our Install Kits Tab.

    Four packages are available:

    • PN 30-5600, CD-5 Carbon Non-Logging/Non GPS Display
    • PN 30-5601, CD-5L Carbon Logging Display
    • PN 30-5602, CD-5G Carbon Non-Logging Display with Internal GPS
    • PN 30-5603, CD-5LG Carbon Logging Display with Internal GPS

    Features:

    • Full color 5” screen with 800x480 resolution
    • Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
    • Layout files interchangeable with all versions of the CD-7
    • Wiring interface/harness is identical to the CD-7
    • Rugged, lightweight flow-molded carbon fiber composite enclosure
    • Total display weight of 11.7 oz./331 grams
    • IP66 water resistance allows for operation in boats and motorcycles without worry
    • Accepts channels from two separate user programmable CAN bus connections – works with AEMnet enabled devices and non-AEM 3rd party devices side by side
    • Plug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs
    • Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
    • Install the CD-5 Carbon on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212, sold separately)
    • Available with or without 200Mb internal logging (up to 1,000Hz/channel)
    • Available with or without on-board GPS receiver and antenna
    • Add Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)
    • Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages
    • Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)
    • Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
    • Use included page layouts and input your channels and text, or create your own from scratch
    • Free DashDesign Graphics Editor software
    • Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
    • Two programmable LEDs
    • Odometer function
    • Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
    • ‘Headlight-in’ connection dims the dash and LEDs during night operation
    • Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
    • User supplied graphics can be changed based on channel values (up to the full screen size)
    • Convert CAN bus channel values to user-defined text in multiple languages

    AEM CD-5LG Carbon Logging w/ Internal GPS Digital Display Dash

    AEM CD-5LG Carbon Logging w/ Internal GPS Digital Display Dash

    OVERVIEW

    CD-5 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.

    VIEW AND LOG DATA FROM OVER 250 CAN DEVICES!
    The CD-5 Carbon receives channels from two independent CAN bus inputs and it does not require special modules to read AEM and/or 3rd-party CAN signals. We have validated it to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port (see Supported Apps Tab), and the CD-5 Carbon can be added to any vehicle with the addition of our 22 Channel CAN Sensor Module. The CD-5 Carbon is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go! All channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screens or warning alerts.

    Third-party systems will require download of 3rd party DBC CAN bus protocol files for proper operation if they are not included in our setup software. We currently have over 250 validated 3rd party applications, and include a CD Dash Power Cable to simplify the installation of 3rd party devices. We have also developed 3rd Party Plug & Play Adapter Cables for certain applications, which are highlighted on our Supported Apps Tab and can be viewed on our Install Kits Tab.

    Four packages are available:

    • PN 30-5600, CD-5 Carbon Non-Logging/Non GPS Display
    • PN 30-5601, CD-5L Carbon Logging Display
    • PN 30-5602, CD-5G Carbon Non-Logging Display with Internal GPS
    • PN 30-5603, CD-5LG Carbon Logging Display with Internal GPS

    Features:

    • Full color 5” screen with 800x480 resolution
    • Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
    • Layout files interchangeable with all versions of the CD-7
    • Wiring interface/harness is identical to the CD-7
    • Rugged, lightweight flow-molded carbon fiber composite enclosure
    • Total display weight of 11.7 oz./331 grams
    • IP66 water resistance allows for operation in boats and motorcycles without worry
    • Accepts channels from two separate user programmable CAN bus connections – works with AEMnet enabled devices and non-AEM 3rd party devices side by side
    • Plug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs
    • Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
    • Install the CD-5 Carbon on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212, sold separately)
    • Available with or without 200Mb internal logging (up to 1,000Hz/channel)
    • Available with or without on-board GPS receiver and antenna
    • Add Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)
    • Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages
    • Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)
    • Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
    • Use included page layouts and input your channels and text, or create your own from scratch
    • Free DashDesign Graphics Editor software
    • Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
    • Two programmable LEDs
    • Odometer function
    • Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
    • ‘Headlight-in’ connection dims the dash and LEDs during night operation
    • Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
    • User supplied graphics can be changed based on channel values (up to the full screen size)
    • Convert CAN bus channel values to user-defined text in multiple languages

    AEM CD-7 Carbon Logging / Non-GPS Digital Dash Display

    AEM CD-7 Carbon Logging / Non-GPS Digital Dash Display


    AEM has updated its CD-7 Digital Dash Display from an aluminum enclosure to a carbon fiber composite enclosure and in the process has reduced its mass from 740g/26.1 oz. to only 595g/20.9oz. That’s almost 1/3rd lbs. less and makes the CD-7 Carbon the lightest graphical dash of its size among major competitors! The new CD-7 Carbon digital displays also have optional integrated 20Hz GPS, which replaces the dash packages that included a Vehicle Dynamics Module. Of course, the Vehicle Dynamics Module still works with any CD Digital Dash Display and can be purchased separately.

    OVERVIEW
    CD-7 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.

    VIEW AND LOG DATA FROM OVER 250 CAN DEVICES!
    The CD-7 Carbon receives channels from two independent CAN bus inputs and it does not require special modules to read AEM and/or 3rd-party CAN signals. We have validated it to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port (see Supported Apps Tab), and the CD-7 Carbon can be added to any vehicle with the addition of our 22 Channel CAN Sensor Module. The CD-7 Carbon is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go! All channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screens or warning alerts.

    Third-party systems will require download of 3rd party DBC CAN bus protocol files for proper operation if they are not included in our setup software. We currently have over 250 validated 3rd party applications, and include a CD Dash Power Cable to simplify the installation of 3rd party devices. We have also developed 3rd Party Plug & Play Adapter Cables for certain applications, which are highlighted on our Supported Apps Tab and can be viewed on our Install Kits Tab.

    Four packages are available:

    • PN 30-5700, CD-7 Carbon Non-Logging/ Non-GPS Display
    • PN 30-5701, CD-7L Carbon Logging Display
    • PN 30-5702, CD-7G Carbon Non-Logging Display with Internal GPS
    • PN 30-5703, CD-7LG Carbon Logging Display with Internal GPS

    CD-7 CARBON FEATURES:

    • Full color 7” screen with 800x480 resolution
    • Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
    • Layout files interchangeable with all versions of the CD-5 Carbon
    • Wiring interface/harness is identical to the CD-5 Carbon
    • Rugged, lightweight flow-molded carbon fiber composite enclosure
    • Total display weight of 20.9 oz. / 595 grams
    • IP65 water resistance - open cockpit, marine and motorcycle safe
    • Accepts channels from two separate user programmable CAN bus connections – works with AEMnet enabled devices and non-AEM 3rd party devices side by side
    • Plug & Play Adapter Cables available for HolleyLinkMSD Atomic and Vi-Pec ECUs
    • Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
    • Install the CD-7 Carbon on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212, sold separately)
    • Available with or without 200Mb internal logging (up to 1,000Hz/channel)
    • Available with or without on-board 20Hz GPS receiver and antenna
    • Add a Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)
    • Add an 8 Channel K-Type EGT CAN Module for 8 additional temps via AEMnet CAN bus (PN 30-2224, sold separately)
    • Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages
    • Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)
    • Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
    • Use included page layouts and input your channels and text, or create your own from scratch
    • Free DashDesign Graphics Editor software
    • Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
    • Two programmable LEDs
    • Odometer function
    • Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
    • ‘Headlight-in’ connection dims the dash and LEDs during night operation
    • Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
    • User supplied graphics can be changed based on channel values (up to the full screen size)
    • Convert CAN bus channel values to user-defined text in multiple languages


    Showing 1 to 25 of 104 (5 Pages)